Sub-menu 1 Sub-menu 2 Settings CodeFirst Ring*2, *8 – 1: <On> 0: Off #173 –Main menu: “Caller Barred”*2, *13Operation CodeStoring/Viewing bar call numbers. #217 28*1 KX-TG6821 series: page 3*2 If you program these settings using one of the handsets, you do not need to program thesame item using another handset. (KX-TG6812)*3 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*4 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.(Caller ID subscribers only)To use this feature, set the date and time first (page 13).*5 KX-TG6812*6 The ringer tone may continue to play for several seconds even if the caller has already hungup. You may either hear a dial tone or no one on the line when you answer the call.*7 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used withpermission of © 2012 Copyrights Vision Inc.*8 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings 2 times or more by default, which dependson your service provider/telephone company.*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing anykeys, including confirmation tones and error tones.*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*12 To prevent other users from joining your conversations with outside callers, turn this featureon.*13 KX-TG6811 series: page 3Special programmingAlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Set the date and time beforehand(page 13).1 M N#7202 Select an alarm by pressing 1 to 3. aMOKN26ProgrammingTG68xxSA(en)_0619_ver011.pdf 26 2013/06/19 17:43:16