Advanced new messagealerting featuresAudible message alertThis feature allows the base unit to beep toinform you of a new message arrival whennew messages are recorded. The base unitbeeps 2 times every minute until you listen tothe messages, if the “Base unit beep”setting is turned on. The default setting is“Off”.Handset1 MMENUN#3392 MbN: Select the desired setting. aMSAVEN a MOFFNNote:R When the silent mode is activated(page 32), the base unit beeps will notsound.New message alert by a callThis feature allows the unit to make a call tothe pre-stored phone number and inform youthat a new message has been received byannouncement.To use this feature, you must:– store a phone number to which the unitmakes the call to.– turn on the new message alert setting.After you answer the new message alert call,you can listen to messages from that call(page 44).Important:R The unit makes a call to the pre-storedphone number after the new message isrecorded:– If the call is answered, theannouncement is repeated for about 1minute.– If nobody answers within 1 minute, theunit will not retry the call.Storing a phone number to which theunit makes an alert callHandsetn From the phonebook:1 MMENUN#3382 MbN: “Notification to” aMSELECTN a MADDN3 MbN: “Phonebook” a MSELECTN4 MbN: Select the desired phonebookentry. a MSAVEN a MOFFNn By entering a phone number:1 MMENUN#3382 MbN: “Notification to” aMSELECTN a MADDN3 MbN: “Manual” a MSELECTN4 Enter the desired name (16 charactersmax.; page 22). a MOKN5 Enter the desired number (24 digitsmax.). a MOKN a MSELECTN aMOFFNTurning on/off the new message alertsettingHandset1 MMENUN#3382 MbN: “On/Off” a MSELECTN3 MbN: Select the desired setting. aMSAVEN a MOFFNEditing the set phone numberHandset1 MMENUN#3382 MbN: “Notification to” a MSELECTN3 MMENUN a MbN: “Edit” a MSELECTN4 Edit the name if necessary (16 charactersmax.; page 22). a MOKN5 Edit the phone number if necessary (24digits max.). a MOKN a MSELECTN aMOFFNFor assistance, please visit http://www.panasonic.com/help 43Answering System