IntercomIntercom calls can be made:– between handsets– between a handset and the base unitNote:R When paging unit(s), the paged unit(s)beeps for 1 minute.R If you receive an outside call while talkingon the intercom, you hear 2 tones.– To answer the call with the handset,press MOFFN, then press M N.– To answer the call with the base unit,press MZN 2 times.Making an intercom callHandset1 MINTN*1orMMENUN a MbN: “Intercom” aMSELECTN2 MbN: Select the desired unit. a MSELECTNR To stop paging, press MOFFN.3 When you finish talking, press MOFFN.*1 If there is a new message in the voicemail or answering system, MINTN is notdisplayed.Base unit1 Press MINTERCOMN.When 2 or more handsets areregistered:– To page a specific handset, enter thehandset number.– To page all handsets, press 0 or waitfor a few seconds.R To stop paging, press MINTERCOMN.2 When you finish talking, pressMINTERCOMN.Answering an intercom callHandset1 Press M N to answer the page.2 When you finish talking, press MOFFN.Base unit1 Press MINTERCOMN to answer the page.2 When you finish talking, pressMINTERCOMN.Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit: Press MLOCATORN.R All registered handsets beep for 1minute.2 To stop paging:Base unit:Press MLOCATORN.Handset:Press M N, then press MOFFN.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party can bemade:– between 2 handsets– between a handset and the base unitHandset1 During an outside call, press MMENUN toput the call on hold.2 MbN: “Intercom” a MSELECTN3 MbN: Select the desired unit. a MSELECTN4 Wait for the paged party to answer.R If the paged party does not answer,press M N to return to the outsidecall.5 To complete the transfer:Press MOFFN.R The outside call is being routed to thedestination unit.To establish a conference call:MMENUN a MbN: “Conf.” a MSELECTNFor assistance, please visit http://www.panasonic.com/help 49Intercom/LocatorTG684x7x(en)_1127_ver021.pdf 49 2012/11/27 18:16:48