Panasonic KX-TG7100CX Quick Manual

Also see for KX-TG7100CX: Operating instructions

Contents

– 3 –5 Frequently asked questionsHandset phonebook: storing anentry (name and phonenumbers){k} i {j/OK} i “New Entry” i {>} iEnter the party’s name (16 characters max.). i{j/OK} i Enter the party’s phone number (24 digitsmax.). i {j/OK} i “Save” i {>} i {ih}L To enter a name, see the character table in theoperating instructions.Handset phonebook: making acall{k} i Press {^} or {V} to display the desired entry.i {C}Handset ringer volume {j/OK} i “Handset Setup” i {>} i“Ringer Setup” i {>} i “Ringer Volume”i {>} i Press {^} or {V} to select the desiredvolume. i {>} i {ih}Changing ringtone(outside calls){j/OK} i “Handset Setup” i {>} i“Ringer Setup” i {>} i “Ext. Ringtone”i {>} i Select the desired ringtone. i {>} i{ih}Question Cause & solutionWhat kind of power outlet shouldI connect the AC adaptor to?Connect the AC adaptor to a 220–240 V outlet.Why is w flashing? L The handset is too far from the base unit. Move closer.L The AC adaptor is not connected. Check theconnections.L You are using the handset or base unit in an area withhigh electrical interference. Place the handset andbase unit away from interference sources, such asantennas and mobile phones.L The handset is not registered to the base unit.Register it.{j/OK} i “Handset Setup” i {>} i“Registration” i {>} i “Register H.set”i {>} i Press and hold {x} on the base unit forabout 3 seconds, until the registration tone sounds. iWait until “Enter Base PIN” is displayed. i Enterthe base unit PIN (default: “0000”). i {j/OK}Why can I not make calls? The dialling mode setting is incorrect. Set to “Tone” or“Pulse” as needed.Why is the handset displayblank?The handset is not turned on. To turn the power on,press {ih} for about 1 second.Feature OperationTG7100CX(e-e)_QG.fm Page 3 Thursday, May 11, 2006 8:06 PM

/ 6

Related manuals for Panasonic KX-TG7100CX