Panasonic KX-TG7210E Operating Instructions Manual

Also see for KX-TG7210E: Quick guide

Multi-unit Operation31Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 83335 Select the handset(s) you want tocancel, by pressing the desiredhandset number. i {j/OK}L The selected handset number(s)will flash.L To cancel a selected handsetnumber, press the number again.The number will stop flashing.6 {^}/{V}: “Yes” i {>}L A long beep will sound as eachhandset number disappears.L The handset does not beep whencancelling its own registration.7 {ih}Increasing the range of thebase unitYou can increase the signal range of thebase unit by using a DECT repeater.Please use only the Panasonic DECTrepeater noted on page 6. Consult yourPanasonic dealer for details.Important:L Before registering the repeater to thisbase unit, you must turn the repeatermode on.L Do not use more than one repeater ata time.Setting the repeater mode1 {j/OK}2 {^}/{V}: “Base Unit Setup” i{>}3 {^}/{V}: “Other Options” i{>}4 {^}/{V}: “Repeater Mode” i{>}5 {^}/{V}: “On” or “Off” i {>} i{ih}Note:L After turning repeater mode on or off,w will flash on the handsetmomentarily. This is normal. Thehandset can be used once w stopsflashing.Intercom betweenhandsetsIntercom calls can be made betweenhandsets.Example: When handset 1 callshandset 21 Handset 1:{INT} i Press {2} (desiredhandset number).2 Handset 2:{C}3 When finished talking, press{ih}.Transferring callsbetween handsetsOutside calls can be transferredbetween 2 people.Example: When handset 1 transfers acall to handset 21 Handset 1:During an outside call, press {INT}.i Press {2} (desired handsetnumber).L The outside call will be put onhold.L If there is no answer, press {INT}to return to the outside call.2 Handset 2:Press {C} to answer the page.L Handset 2 can talk with handset1.TG7210-7230E(e).book Page 31 Tuesday, October 16, 2007 12:59 PM