Panasonic KX-TG7841 Operating Instructions Manual

Also see for KX-TGA680: Installation manual Operating instructions Installation manual

Contents

Panasonic KX-TG7841 Operating Instructions Manual Manual pdf 19 page image

intervals when it returns within base unitrange. You can set the interval. The defaultsetting is “1 min”.Important:R When you are using a cellular line or aBluetooth headset, the base unit loses itsconnection from other Bluetooth devices(cellular phone or headset). Toautomatically resume the connection tocellular phones, leave the auto connectionon.R Some cellular phones lose connection afterusage, please check the specifications ofyour cellular phone for more details.Handset1 MMENUN#6322 MbN: Select the desired setting.3 MSAVEN a MOFFNNote:R Some cellular phones may ask you if youaccept the connection requirement from thebase unit. In that case, select “Off” in step2. Check the specifications of your cellularphone.Connecting/disconnecting thecellular phone manuallyIf you will not be using the paired cellularphone’s link to cell feature temporarily (forexample, you do not want the unit to ringwhen your cellular line receives a call), youcan disconnect your cellular phone from thebase unit. If you want to use it again,reconnect the cellular phone to the base unit.Note:R Even if a paired cellular phone wasdisconnected from the base unit, if it isbrought within the base unit’s range duringthe auto connection interval, it mayautomatically connect to the base unit(page 18).R A disconnected cellular phone is not“Unpair” from the base unit, so pairing itto the base unit again is unnecessary.Handset1 To connect/disconnect:For CELL 1: MMENUN#6251For CELL 2: MMENUN#6252R A long beep sounds.2 MOFFNCellular line only mode (If you donot use the landline)If you do not use the landline, we recommendsetting the unit to the cellular line only mode.Important:R If you turn on the “Cell line onlymode”, disconnect the telephone line cordfrom the base unit. Otherwise the “Cellline only mode” cannot be activated.Handset1 MMENUN#1572 To turn on:MbN: “On” a MSELECTN aMbN: “Yes” a MSELECTNTo turn off:MbN: “Off” a MSELECTNNote:R Once you set this mode, you can use thefollowing buttons to make cellular calls:– for the handset, press M N or MZNinstead of MCELLN (page 21).– for the base unit, press MZN instead ofthe line button (MCELL 1N or MCELL 2N)set for the cellular line selection(page 20, 28).R Once you set this mode, the followingfeatures cannot be used:– Landline features (page 43)– Answering system (page 56)Messages cannot be received.– Voice mail features (page 63)R After this mode is turned on or off, the baseunit reboots.– Bluetooth connections from cellularphones or headset are disconnected. Ifthe auto connection is turned on(page 18), the cellular phones arereconnected.For assistance, please visit http://www.panasonic.com/help 19Link to Cell