Answering systemProblem Cause/solutionThe unit does not record newmessages.R The answering system is turned off. Turn it on (page 56).R The answering system does not answer or record callsfrom cellular lines.R The message memory is full. Erase unnecessarymessages (page 57).R The recording time is set to “Greeting only”. Changethe setting (page 62).R If you subscribe to a voice mail service, messages arerecorded by your service provider/telephone company,not your telephone. Change the unit’s number of ringssetting or contact your service provider/telephonecompany (page 62).R The answering system will not answer incoming callswhile:– the base unit or 2 or more handsets are on a cellularcall or an intercom call.– a headset is in use.Caller information is recorded in the caller list.I cannot operate the answeringsystem remotely.R The remote access code is not set. Set the remoteaccess code (page 60).R You are entering the wrong remote access code. If youhave forgotten your remote access code, enter theremote access code setting to check your current code(page 60).R The answering system is turned off. Turn it on (page 61).R You cannot operate the answering system when calling acellular phone paired to the base unit.The unit does not emit thespecified number of rings.R If the first ring is turned off, the number of rings decreasesby 1 from the specified number of rings.Bluetooth PINProblem Cause/solutionI cannot remember the PIN. R Change the PIN using the following method.1 MMENUN#6192 *70003 Enter the new 4-digit PIN. a MOKN4 Enter the new 4-digit PIN again. a MSAVEN a MOFFNFor assistance, please visit http://www.panasonic.com/help 75Useful Information