Panasonic KX-TG7841BX Operating Instructions Manual

Contents

3 MbN: Select the desired setting.4 Press MOKN to exit.Note:R When this feature is activated, isdisplayed while talking.R Depending on the condition and quality ofyour telephone line, this feature mayemphasize existing line noise. If it becomesdifficult to hear, turn this feature off.R This feature is not available while using thespeakerphone.Call shareYou can join an existing outside call.n While another unit is on a cellular call:1 To join the conversation, pressMCELLN.R You can join the conversation when:– only 1 cellular phone is paired.– a specific line is set to makecellular calls (page 17).2 MbN: Select the desired cellular phone.a MSELECTNn While another unit is on a landline call:To join the conversation, press M N.Note:R To prevent other users from joining yourconversations with outside callers, turn callsharing mode off (page 35).Transferring a cellular callbetween the handset and acellular phoneTransferring a cellular call from thehandset to a cellular phone1 Press MMENUN during a cellular call.2 MbN: “Transfer to cell” aMSELECTNR The cellular call is transferred to thecellular phone.Note:R Depending on your cellular phone type, youmay need to set the cellular phone to beready to talk before transferring. Forexample, if your cellular phone has a topcover, open it beforehand.Transferring a cellular call from acellular phone to the handsetDuring a conversation using a cellular phone,the call cannot be transferred to the handsetby the cellular phone. Perform the followingwith the handset.1 During a conversation using a cellularphone, press MCELLN.R The call is transferred to the handsetwhen:– only 1 cellular phone is paired.– a specific line is set to make cellularcalls (page 17).2 MbN: Select the desired cellular phone. aMSELECTNR The call is transferred to the handset.Using the other line during aconversationYou can handle a cellular call and a landlinecall at the same time. When another call isbeing received during a conversation, theinterrupt tone sounds (page 34), and the 2ndcaller’s information is displayed if yousubscribe to Caller ID (page 41). You cananswer the 2nd call while holding the 1st call.Making/answering a cellular callduring a conversation on the landline1 Press MMENUN during a landline call.2 MbN: “Hold” a MSELECTN3 To make a 2nd call:Dial the phone number. a MCELLN*1 aMbN: Select the desired cellular phone. aMSELECTN*1 The unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to makecellular calls (page 17).To answer a 2nd call:MCELLN21Making/Answering Calls Using the HandsetTG7841BX_UE(en)_0528_ver011.pdf 21 2013/05/28 18:56:47