Panasonic KX-TG7841BX Operating Instructions Manual

Contents

IntercomIntercom calls can be made between ahandset and the base unit.Note:R When paging a unit, the paged unit beepsfor 1 minute.R If you receive an outside call while talkingon the intercom, you hear 2 tones.– To answer the call with the handset,press MOFFN, then press M N.– To answer the call with the base unit,press MZN 2 times.Making an intercom callHandset1 MMENUN a MbN: “Intercom” aMSELECTN2 MSELECTNR To stop paging, press MOFFN.3 When you finish talking, press MOFFN.Note:R In step 1, the following soft key is alsoavailable to make an intercom call.When a cellular phone is paired:MMENUN a MINTN*1When a cellular phone is not paired:MINTN*1*1 If there is a new message in the voicemail or answering system, MINTN is notdisplayed.Base unit1 Press MINTERCOMN.R To stop paging, press MINTERCOMN.2 When you finish talking, pressMINTERCOMN.Answering an intercom callHandset1 Press M N to answer the page.2 When you finish talking, press MOFFN.Base unit1 Press MINTERCOMN to answer the page.2 When you finish talking, pressMINTERCOMN.Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit: Press MLOCATORN.R The registered handset beeps for 1minute.2 To stop paging:Base unit:Press MLOCATORN.Handset:Press M N, then press MOFFN.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party can bemade between a handset and the base unit.Handset1 During an outside call, press MMENUN toput the call on hold.2 MbN: “Intercom” a MSELECTN3 MSELECTN4 Wait for the paged party to answer.R If the paged party does not answer,press M N to return to the outsidecall.5 To complete the transfer:Press MOFFN.R The outside call is being routed to thedestination unit.To establish a conference call:MMENUN a MbN: “Conf.” a MSELECTNR To leave the conference, press MOFFN.The other 2 parties can continue theconversation.56Intercom/LocatorTG7841BX_UE(en)_0528_ver011.pdf 56 2013/05/28 18:56:49