Recording your greeting messageHandset1 MMENUN#3022 MbN: “Yes” a MSELECTN3 After a beep sounds, hold the handsetabout 20 cm (8 inches) away and speakclearly into the microphone (2 minutesmax.).4 Press MSTOPN to stop recording.5 MOFFNUsing a pre-recorded greetingmessageThe unit provides 2 pre-recorded greetingmessages:– If you erase or do not record your owngreeting message, the unit plays apre-recorded greeting asking callers toleave a message.– If the message recording time (page 65)is set to “Greeting only”, callers’messages are not recorded and the unitplays a different pre-recorded greetingmessage asking callers to call again.Resetting to a pre-recorded greetingmessageIf you want to use a pre-recorded greetingmessage once you record your own greetingmessage, you need to erase your owngreeting message.Handset1 MMENUN#3042 MYESN a MOFFNPlaying back the greetingmessageHandset1 MMENUN#3032 To exit, press MOFFN.Listening to messagesusing the base unitWhen new messages have been recorded:– M N on the base unit flashes.– “New message” is displayed.Press M N (PLAY).R If new messages have been recorded, thebase unit plays back new messages.R If there are no new messages, the baseunit plays back all messages.Operating the answering systemduring playbackKey OperationMDN or MCN Adjust the speakervolumeM N Repeat message*1M N Skip messageMPAUSEN Pause messageTo resume playback,press M N.MnN (STOP) Stop playbackMERASEN Erase currently playingmessage*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.Calling back (Call Displaysubscribers only)If caller information was received for the call,you can call the caller back while listening to amessage.Press MZN during playback.R To edit the number before calling back,press MEDITN repeatedly until the phonenumber is shown in the desired format(page 53).R To call back using a cellular line, continuefrom step 2, “Making cellular calls”, page 29.60Answering System for LandlineTG78xxC(en)_1221_ver013.pdf 60 2012/12/21 11:21:32