Erasing all messagesPress MERASEN 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have been recorded,“New message” is displayed.1 To listen to new messages:MMENUN#323To listen to all messages:MMENUN#3242 When finished, press MOFFN.Note:R To switch to the receiver, press M N.R In step 1, the following soft key is alsoavailable to listen to new messages.When a cellular phone is paired:MMENUN a MPLAYN*1When a cellular phone is not paired:MPLAYN*1*1 If there are no new messages in theanswering system, MPLAYN is notdisplayed.Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTNKey OperationMDN or MCN Adjust the receiver/speakervolume (during playback)1 or MFN Repeat message (duringplayback)*12 or MEN Skip message (duringplayback)3 Enter the “Settings” menu4 Play new messages5 Play all messages6 Play greeting message76 Record greeting messageKey Operation8 Turn answering system onMPAUSEN Pause message*29 orMSTOPNStop recordingStop playback0 Turn answering system off*4*3 Erase currently playingmessage*5 Erase all messages*6 Reset to a pre-recordedgreeting message*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 To resume playback:MbN: “Playback” a MSELECTN*3 You can also erase as follows:MPAUSEN a MbN: “Erase” aMSELECTN a MbN: “Yes” a MSELECTNCalling back (Call Displaysubscribers only)If caller information is received for the call, youcan call the caller back while listening to amessage.1 Press MPAUSEN during playback.2 MbN: “Call back” a MSELECTNEditing the number before calling back1 Press MPAUSEN during playback.2 MbN: “Edit & Call” a MSELECTN3 Press MEDITN repeatedly until the phonenumber is shown in the desired format(page 53). a M NR To call back using a cellular line,continue from step 2, “Making cellularcalls”, page 22.Erasing all messages1 MMENUN#3252 MbN: “Yes” a MSELECTN a MOFFN61Answering System for LandlineTG78xxC(en)_1221_ver013.pdf 61 2012/12/21 11:21:32