Panasonic KX-TG8161E Operating Instructions Manual

IntercomIntercom calls can be made betweenhandsets.Note:R When paging the handset, the pagedhandset beeps for 1 minute.R If you receive an outside call while talkingon the intercom, you hear 2 tones. Toanswer the call, press M N, then pressM N.Making an intercom call1 (middle soft key) a2 MbN: Select the desired unit. aR To stop paging, press M N.3 When you finish talking, press M N.Answering an intercom call1 Press M N to answer the page.2 When you finish talking, press M N.Using the smart function keyPress MSmart functionN to answer the page.Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit: Press M N.R All registered handsets beep for 1minute.2 To stop paging:Base unit: Press M N.Handset: Press M N.Using the smart function keyYou can also stop paging by pressing MSmartfunctionN.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party can bemade between 2 handsets.1 During an outside call, press to putthe call on hold.2 MbN: Select the desired unit. a3 Wait for the paged party to answer.R If the paged party does not answer,press to return to the outside call.4 To complete the transfer:Press M N.R The outside call is being routed to thedestination unit.To establish a conference call:a MbN: “Conference” aR To leave the conference, pressM N. The other 2 parties cancontinue the conversation.R To put the outside call on hold:a MbN: “Hold” aTo resume the conference: aMbN: “Conference” aNote:R If you want to return to the outside call afterthe paged party answers, press .Answering a transferred callPress M N to answer the page.Using the smart function keyPress MSmart functionN to answer the page.44 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333Intercom/LocatorTG8151_61E(en)_1220_ver021.pdf 44 2011/12/20 18:50:50