X SMS (Short Message Service)31Using SMSSMS allows you to send and receive textmessages between other fixed-line andmobile phones that support compatibleSMS networks and features.Important:L To use SMS features, you must:– subscribe to Caller ID and/orappropriate service– confirm SMS is turned on– confirm the correct message centrenumbers are storedConsult your serviceprovider/telephone company fordetails and availability.Note:L A total of 47 messages (at 160characters/message) can be saved.Total number may be more than 47 iflength of messages is less than 160characters/message.L If the unit is connected to a PBXsystem, you may not be able to useSMS features.Turning SMS on/off1 " (centre of joystick) i X i#2 {^}/{V}: “Settings” i #3 {^}/{V}: “SMS On/Off” i #4 {^}/{V}: “On” or “Off” i # i{ih}Storing SMS messagecentre numbersSMS message centre telephonenumbers must be stored in order to sendand receive SMS messages. Consultyour service provider/telephonecompany for more information.L If you change the unit’s regionsetting/reset the base unit, the storedmessage centre numbers will bedeleted (page 26). In this case, storethe numbers again.1 " (centre of joystick) i X i#2 {^}/{V}: “Settings” i #3 {^}/{V}: “Message Centre1” or“Message Centre2” i #4 Edit the number as necessary. i#5 {^}/{V}: “Save” i # i{ih}Note:L For PBX users:– You need to add the PBX lineaccess number and a dialling pauseto the beginning of the MessageCentre 1 phone number.– If you only use the Message Centre1 phone number for SMS, store theMessage Centre 1 phone numberas is (without adding a line accessnumber or dialling pause) toMessage Centre 2.TG8200_8220FX(e-e).book Page 31 Monday, August 6, 2007 5:25 PM