Answering System32 For assistance, please visit http://www.panasonic.com/helpListening to messagesusing the handsetWhen new messages have beenrecorded, “New message” is displayed.1 {MENU} (center of joystick) i Ii {SELECT}2 {V}/{^}: “Play new msg.” or “Playall msg.” i {SELECT}3 When finished, press {OFF}.Note:L To switch to the receiver, press {C}.Calling back (Caller ID subscribersonly)If caller information was received for thecall, you can call the caller back whilelistening to a message.1 Press {MENU} during playback.2 {V}/{^}: “Edit & Call” i{SELECT}L Press {EDIT} repeatedly until thephone number is shown in thedesired format.3 {CALL}Erasing all messages1 {MENU} (center of joystick) i Ii {SELECT}2 {V}/{^}: “Erase message” i{SELECT}3 {V}/{^}: “Erase all” i{SELECT}4 {V}{^}: “Yes” i {SELECT} i{OFF}Operating the answeringsystemYou can also operate the answeringsystem by pressing dial keys on thehandset.To use the following commands:{MENU} (center of joystick) i I i{SELECT}Key OperationPushing thejoystick upor downAdjust the receiver/speaker volume(during playback){1} or pushthe joystickleftRepeat message(during playback)*1{2} or pushthe joystickrightSkip message(during playback){3} Enter the “Settings”menu{4} Play new messages{5} Play all messages{6} Play greeting message{7}{6} Record greetingmessage{8} Turn answering systemon{9} Stop (recording,playback){0} Turn answering systemoff{*}{4}*2 Erase currently playingmessage{*}{5} Erase all messages{*}{6} Erase greetingmessage