Panasonic KX-TG9372C Operating Instructions Manual

Preparation14Setting up the unitbefore useDisplay languageYou can select either “English” or“Français” as the display language.The default setting is “English”.1 {MENU} i {#}{1}{1}{0}2 {V}/{^}: Select the desired setting.3 Press the right soft key to save. i{OFF}Voice guidance languageYou can select either “English” or“Français” as the voice guidancelanguage of the answering system. Thissetting also determines the voiceannouncement language of the talkingalarm clock and talking battery alert. Thedefault setting is “English”.1 {MENU} i {#}{1}{1}{2}2 {V}/{^}: Select the desired setting.3 {Save} i {OFF}Dialing modeIf you cannot make calls, change thissetting according to your telephone lineservice. The default setting is “Tone”.“Tone”: For tone dial service.“Pulse”: For rotary/pulse dial service.1 {MENU} i {#}{1}{2}{0}2 {V}/{^}: Select the desired setting.3 {Save} i {OFF}Date and time1 {MENU} i {#}{1}{0}{1}2 Enter the current month, date, andyear by selecting 2 digits for each.Example: July 15, 2008{0}{7} {1}{5} {0}{8}3 Enter the current hour and minute(12-hour clock format) by selecting 2digits for each.Example: 9:30{0}{9} {3}{0}4 {AM/PM}: Select “AM” or “PM”.5 {Save} i {OFF}Note:L When English is selected as thedisplay language, 12-hour clockformat is used. When French isselected, 24-hour clock format isused.L To correct a digit, press {^}, {V}, {<},or {>} to move the cursor to the digit,then make the correction.L The date and time may be incorrectafter a power failure. In this case, setthe date and time again.TG9372C(e).book Page 14 Friday, August 22, 2008 3:28 PM