Panasonic KX-TG9391 Operating Instructions Manual

Also see for KX-TG9391: Quick guide Operating instructions Installation manual

Contents

Panasonic KX-TG9391 Operating Instructions Manual Manual pdf 17 page image

Preparation17For assistance, please visit http://www.panasonic.com/help4 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Date and timeProgram this setting using either the base unit orone of the handsets.1 {MENU} i {#}{1}{0}{1}2 Enter the current month, date, and year byselecting 2 digits for each.Example: September 15, 2008{0}{9} {1}{5} {0}{8}3 Enter the current hour and minute (12-hourclock format) by selecting 2 digits for each.Example: 9:30{0}{9} {3}{0}4 Press {*} to select “AM” or “PM”.5 {SAVE}6 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Note:L When English is selected as the displaylanguage, 12-hour clock format is used. WhenSpanish is selected, 24-hour clock format isused.L To correct a digit:Base unit: Press {^}, {V}, {7}, or {8} tomove the cursor to the digit, then make thecorrection.Handset: Press {^}, {V}, {<}, or {>} to movethe cursor to the digit, then make the correction.L The date and time may be incorrect after apower failure. In this case, set the date and timeagain.Line selection modeThe line selection mode determines which line isselected when:– you lift the corded handset– you press {SP-PHONE} on the base unit (whenmaking/answering calls)– you press {C}/{s} on the handset (whenmaking/answering calls)The following setting is available:– “Auto” (default): When making a call, line 1 isselected. If that line is unavailable, line 2 isselected. When you call back using the caller list(page 33) or while listening to a message (page37, 38), the indicated line is used. Whenanswering a call, the ringing line is selected.– “Line1”: Line 1 is selected.– “Line2”: Line 2 is selected.1 {MENU} i {#}{2}{5}{0}2 {V}/{^}: Select the desired setting.3 {SAVE}4 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Note:L You can select a line manually regardless of theline selection mode by pressing {LINE 1} or{LINE 2}.: Base unit / Y Handset: Base unit / Y Handset