Panasonic KX-TG9542 Operating Instructions Manual

Also see for KX-TG9541: Operating instructions Quick guide Operating instructions Quick guide

Contents

Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTN a MbN: Select the desired line. aMSELECTNKey OperationMDN or MCN Adjust the receiver/speaker volume(during playback)1 or MFN Repeat message (duringplayback)*12 or MEN Skip message (during playback)3 Enter the “Settings” menu4 Play new messages5 Play all messages8 Turn answering system onMPAUSEN Pause message*29 orMSTOPNStop playback0 Turn answering system off*4*3 Erase currently playing message*5 Erase all messages*1 If pressed within the first 5 seconds of amessage, the previous message is played.*2 To resume playback:MbN: “Playback” a MSELECTN*3 You can also erase as follows:MPAUSEN a MbN: “Erase” a MSELECTNa MbN: “Yes” a MSELECTNCalling back (Caller ID subscribers only)Press the desired landline key (ML1N or ML2N)during playback.n Editing the number before calling back1 Press MPAUSEN during playback.2 MbN: “Edit & Call” a MSELECTN3 Press MEDITN repeatedly until the phonenumber is shown in the desired format(page 48).4 M NR The unit automatically uses the line you setin line selection mode (page 17) to callback. When the line selection mode is set to“Auto”, the indicated line ( or ) is usedfor the call. If the indicated line is alreadybeing used or you want to select the otherline, press ML1N or ML2N.R To call back using a cellular line, continuefrom step 2, “Making cellular calls”, page 22.Erasing all messages1 For line 1: MMENUN#3251For line 2: MMENUN#32522 MbN: “Yes” a MSELECTN a MOFFNAdvanced new messagealerting featuresAudible message alertThis feature allows the base unit to beep to informyou of a new message arrival when newmessages are recorded. The base unit beeps 2times every minute until you listen to themessages, if the “Base unit beep” setting isturned on. The default setting is “Off”.Program this setting using either the base unit orone of the handsets.Handset / Base unit1 For line 1: MMENUN#3391For line 2: MMENUN#33922 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R When the silent mode is activated (page 44),the base unit beeps will not sound.New message alert by a callThis feature allows the unit to make a call to thepre-stored phone number and inform you that anew message has been received byannouncement.To use this feature, you must:– store a phone number to which the unit makesthe call to.– turn on the new message alert setting.After you answer the new message alert call, youcan listen to messages from that call (page 59).This feature can be set for each line separately.For assistance, please visit http://shop.panasonic.com/support 57Answering System for LandlineTG954x_OI(en)_0722_ver210.pdf 57 2015/07/22 12:24:46