Making/Answering Calls17Answering callsWhen a call is being received, the ringerindicator on the handset flashes rapidly.1 Lift the handset and press {C} or {s}.L You can also answer the call bypressing any button except navigatorkey or {OFF}. (Any key talk feature)2 When you finish talking, press {OFF}.Note:L You can change the ringer indicator lightcolour (page 32) and the ringer tone(page 32). You can also adjust thehandset ringer volume (page 32).Auto talkThis feature allows you to answer a call bysimply lifting the handset off the charger.You do not need to press {C}. To activatethis feature, see page 31.Note:L If you subscribe to Call Display serviceand want to view the caller’s informationafter lifting up the handset to answer acall, leave this feature off.Temporary ringer offWhile the handset is ringing for a call, youcan turn the ringer off temporarily bypressing { ~ } or {OFF}.Useful features during acallHOLD buttonThis feature allows you to put an outsidecall on hold.1 Press {HOLD} during an outside call.2 Press {HOLD} again.L To release the hold, press {C}.Note:L If a call is kept on hold for more than 9minutes, an alarm tone starts to sound.After 1 additional minute on hold, the callis disconnected.MuteWhile mute is turned on, you can hear theother party, but the other party cannot hearyou.To mute your voice, press {MUTE}.L To return to the conversation, press{MUTE} or {C}.Note:L {MUTE} is a soft key visible on thehandset display during a call.FLASH buttonPressing {FLASH} allows you to usespecial features of your host PBX such astransferring an extension call, or accessingoptional telephone services such as CallWaiting.TGA572C(e).book Page 17 Monday, July 10, 2006 10:51 AM