Camera Monitoring14 For assistance, please visit http://www.panasonic.com/phonehelpHandset display item for cameramonitoringPaging the handsets from thecordless cameraThe cordless camera can page colordisplay handsets (KX-TGA571) when itdetects sound or by pressing its {Callbutton}. Then the answering handsetuser can monitor live images from thecordless camera.Important:L Only registered color display handsets(KX-TGA571) can be paged from thecordless camera. The base unit andmonochrome display handsets (KX-TGA570) cannot be paged.L If a handset is paged by the cordlesscamera during a call, 2 tones sound andz flashes on the handset. To monitorthe cordless camera from the handset,press {OFF}, then press {s}.L Auto intercom feature cannot be usedwhen paged by a cordless camera.Paging using the cordless cameraaudio sensorImportant:L You can adjust the audio detectionsensitivity (page 16).1 Cordless camera:The cordless camera detects sound.L The cordless camera produces acamera tone and pages the handsetsfor 1 minute.2 Handset:Press {s} to answer the page.L You can monitor the room where thecordless camera is located.3 Handset:To mute your sound output, press{MUTE} if necessary.4 Handset:When you finish monitoring, press{OFF} or place the handset on the baseunit or charger.DisplayeditemMeaningExample:zThe handset is connectedto the cordless camera.When flashing:The cordless camera ispaging the handset. (Itdetects sound or its {Callbutton} is pressed.)