Panasonic KX-TGA715FX Operating Instructions Manual

Contents

Panasonic KX-TGA715FX Operating Instructions Manual Manual pdf 15 page image

15Basic OperationsMulti-unit operation*1 KX-TG7150/KX-TG7170 does not support conference call feature.*2 After pressing {x}, the rest of this procedure must be completed within 1 minute.*3 If you forget the base unit PIN, consult your nearest Panasonic service centre.Feature OperationIntercom: calling Example: When you call handset 1{INT} i Press {1} (desired handset number).L When finished talking, press {ih}.Intercom: answering Press {C}/{s}.L When finished talking, press {ih}.Transferring calls betweenhandsetsExample: When you transfer a call to handset 1During an outside call, press {INT}. i Press {1} (desiredhandset number). i When the handset 1 answered, press{ih} to complete transfer.Conference calls *1(2 people can have aconference call with anoutside party)Example: When you make a conference call with handset 1During an outside call, press {INT}. i Press {1} (desiredhandset number). i When the handset 1 answered, press{3} to establish a conference call.Manual registration Handset:{j/OK} i “Handset Setup” i {>} i“Registration” i {>} i “Register H.set” i{>}Base unit:Press and hold {x} on the base unit for about 3 seconds,until the registration tone sounds.*2Handset:Wait until “Enter Base PIN” is displayed, then enter thebase unit PIN (default: “0000”).*3 i {j/OK}L When the handset has been registered successfully, wwill stop flashing.Cancelling a handset {j/OK} i “Base Unit Setup” i {>} i Enter“335”. i “Cancel Handset” i {>} i Select thehandset(s) you want to cancel, by pressing the desiredhandset number. i {j/OK} i “Yes” i {>} i{ih}TGA715FX_717FX(e-e).book Page 15 Wednesday, February 28, 2007 2:47 PM