8PreparationDisplaysDisplay icons*1 For KX-TG7120/KX-TG8120/KX-TG9120 users only*2 Voice mail users onlyConnectionsConnect the AC adaptor to the charger androute the cable as shown. The charger canbe mounted on the wall, if required.Note:L The AC adaptor must remain connectedat all times. (It is normal for the adaptor tofeel warm during use.)L The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weightof the adaptor may cause it to becomedisconnected.LocationL For maximum distance and noise-freeoperation, place your base unit:– away from electrical appliances such asTVs, radios, personal computers orother phones.– in a convenient, high and centrallocation.DisplayiconMeaningw Within range of a base unitL When flashing: Handsetis searching for base unit.(out of range of base unit,handset is not registeredto base unit, no power onbase unit)L Handset is accessing baseunit. (intercom, paging,changing base unitsettings, etc.)k Handset is on an outsidecall.u Answering system is on. *1(page 19)5 Battery strength[2] Handset number (Standbydisplay setting, page 16)0 New voice mail messagereceived *2L Line is being used byanother handset.L Answering system isbeing used by anotherhandset or the baseunit.*1(220–240 V,50 Hz)Screws25 mmHooksUse only the included AC adaptor.TGA715FX_717FX(e-e).book Page 8 Wednesday, February 28, 2007 2:47 PM