Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press MCLEARN.2 M N3 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press MZN.2 When you finish talking, press MOFFN.Note:R To switch back to the receiver, press MZN/M N.Adjusting the receiver or speakervolumePress MDN or MCN repeatedly while talking.Making a call using the redial listThe last 5 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired phone number.3 M NErasing a number in the redial list1 MEN REDIAL2 MbN: Select the desired phone number.a MERASEN3 MbN: “Yes” a MSELECTN a MOFFNPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 20).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MDN (Pause)2 Dial the phone number. a M NNote:R A 3.5 second pause is inserted each timeyou press MDN (Pause) on the handset.Answering calls1 Lift the handset and press M N or M Nwhen the unit rings.2 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Any key answer: You can answer the call bypressing any dial key.Auto talk: You can answer calls simply bylifting the handset (page 23).Temporary handset ringer off: You can turnthe ringer off temporarily by pressing M N.Adjusting the handset ringer volumePress MDN or MCN repeatedly to select thedesired volume while ringing.Adjusting the base unit ringer volumeAvailable for:KX-TGD220 series (page 3)Press MjN or MkN repeatedly to select thedesired volume.R To turn the ringer off, press and hold MkNuntil the unit beeps.For assistance, please visit http://www.panasonic.com/help 15Making/Answering CallsTGD2xx_(en_en)_1209_ver.040.pdf 15 2013/12/09 10:59:19