Voice mail serviceVoice mail is an automatic answering serviceoffered by your service provider/telephonecompany. After you subscribe to this service,your service provider/telephone company’svoice mail system answers calls for you whenyou are unavailable to answer the phone orwhen your line is busy. Messages arerecorded by your service provider/telephonecompany, not your telephone. Please contactyour service provider/telephone company fordetails of this service.Important:R To use the voice mail service provided byyour service provider/telephone companyrather than the unit’s answering system,turn off the answering system (page 30).For details, see page 33.Storing the voice mail (VM)access numberIn order to listen to your voice mail messages,you must dial your service provider/telephonecompany’s voice mail access number. Onceyou have stored your voice mail accessnumber, you can dial it automatically(page 35).1 MMENUN#3312 Enter your access number (24 digitsmax.). a MSAVEN a MOFFNNote:R When storing your voice mail accessnumber and your mailbox password, pressMDN (Pause) to add pauses (page 15)between the access number and thepassword as necessary. Contact yourservice provider/telephone company for therequired pause time.Example:1-222-333-4444VM accessnumberPauses PasswordPPPP 8888To erase the voice mail accessnumber1 MMENUN#3312 Press and hold MCLEARN until all digitsare erased. a MSAVEN a MOFFNVoice mail (VM) tone detectionYour service provider/telephone companysends special signals (sometimes called“voice mail tones” or “stutter tones”) to the unitto let you know you have new voice mailmessages. If you hear a series of dial tonesfollowed by a continuous dial tone after youpress M N, you have new voice mailmessages. Soon after you hang up a call orafter the phone stops ringing, your unit checksthe phone line to see if new voice mailmessages have been recorded.Turn this feature off when:– You do not subscribe to voice mail service.– Your service provider/telephone companydoes not send voice mail tones.– Your phone is connected to a PBX.If you are not sure which setting is required,contact your service provider/telephonecompany.Turning VM tone detection on/offThe default setting is “On”.1 MMENUN#3322 MbN: Select the desired setting. aMSAVEN a MOFFNListening to voice mail messagesThe unit lets you know that you have newvoice mail messages in the following way:– “New Voice Mail” is displayed ifmessage indication service is available.1 MMENUN#330R The speakerphone turns on.2 Follow the pre-recorded instructions.3 When finished, press MOFFN.For assistance, please visit http://www.panasonic.com/help 35Useful InformationTGD2xx_(en_en)_1209_ver.040.pdf 35 2013/12/09 10:59:20