Panasonic KX-TGD663 Operating Instructions Manual

Compatible voice recognition featuresR Google Assistant (Android 4.0 or later)R Siri (iOS 8.0 or later)Important:R Your cellular phone must support theHands Free Profile (HFP) specification.R In order to use this feature, your cellularphone’s voice recognition feature must beready to use.– iPhone: Make sure Siri is turned on.– Android: In order to use GoogleAssistant, make sure your cellular phoneis registered to your Google account.R If you have multiple voice recognitionfeatures available for your cellular phone,you may need to set the desired voicerecognition feature as the default.R For Android users: Depending on yourcellular phone, you may need to set GoogleAssistant as your cellular phone’s defaultvoice recognition feature. For moreinformation, refer to the operatinginstructions of your cellular phone.Activating remote voice assist1 M NR Go to step 3 in the following situations.– Only 1 cellular phone is paired.– A specific line is set to make cellularcalls (page 21).2 MbN: Select the desired cellular phone. aMSELECTN3 Wait until “Voice assist” is displayed.R A confirmation tone sounds.R Speakerphone is turned onautomatically.R To switch to the receiver, press MZN.4 Speak your commands to your handset.R When you have finished using remotevoice assist, press MOFFN.Note:R While using this feature, you cannot useanother handset to make a cellular callusing the same cellular line.R If you receive a call on the landline or onanother cellular line while using this feature,the interrupt tone sounds.R If you receive a call on the same cellularline while using this feature, voicerecognition ends and the unit receives theincoming call.R If your cellular phone is connected to thebase unit, you may not be able to use yourcellular phone’s microphone to operate itsvoice recognition feature. In this case,disconnect your cellular phone from thebase unit.R The compatible voice commands dependson the cellular phone voice recognitionfeature.Using a Bluetooth headset(optional)By pairing a Bluetooth headset to the baseunit, you can enjoy hands-free conversationswhen talking on landline calls.Important:R Your Bluetooth headset must support theHeadset Profile (HSP) specification.R Only 1 Bluetooth headset can be paired tothe base unit.R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline*1).R For best performance, we recommendusing your Bluetooth headset within 1 m(3.3 feet) of the base unit. The base unitcan communicate with Bluetooth headsetswithin an approximately 10 m (33 feet)range.*1 You cannot use a Bluetooth headset totalk on a cellular line.Pairing a Bluetooth headset tothe base unitImportant:R Make sure that the Bluetooth headset is notconnected to any other Bluetooth device.1 Bluetooth headset:Set your headset to pairing mode.R Refer to the headset’s operatinginstructions.For assistance, please visit http://shop.panasonic.com/support 51Using Bluetooth® DevicesTGD66x(en)_0420_ver020.pdf 51 2021/04/21 17:05:38