Panasonic KX-TGD663 Operating Instructions Manual

Answering systemProblem Cause/solutionThe unit does not record newmessages.R The answering system is turned off. Turn it on (page 54).R The answering system does not answer or record callsfrom cellular lines.R The message memory is full. Erase unnecessarymessages (page 55, 56).R The recording time is set to “Greeting only”. Changethe setting (page 58).R Your phone service provider’s voicemail service may beanswering your calls before the unit’s answering systemcan answer your calls. Change the unit’s number of ringssetting (page 58) to a lower value, or contact your phoneservice provider.R The answering system will not answer incoming callswhile the other devices such as handsets are engaged ina call.I cannot operate the answeringsystem remotely.R The remote access code is not set. Set the remoteaccess code (page 56).R You are entering the wrong remote access code. If youhave forgotten your remote access code, enter theremote access code setting to check your current code(page 56).R The answering system is turned off. Turn it on (page 57).R You cannot operate the answering system when calling acellular phone paired to the base unit.Bluetooth PINProblem Cause/solutionI cannot remember the PIN. R Change the PIN using the following method.1 MMENUN#6192 *70003 Enter the new 4-digit PIN. a MOKN4 Enter the new 4-digit PIN again. a MSAVEN a MOFFNFor assistance, please visit http://shop.panasonic.com/support 71Useful InformationTGD66x(en)_0420_ver020.pdf 71 2021/04/21 17:05:39