Panasonic KX-TGE210FX Operating Instructions Manual

Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press MCN.2 M N3 When you finish talking, press M N orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press MZN.2 When you finish talking, press M N.Note:R To switch back to the receiver, press MZN/M N.Adjusting the receiver or speakervolumePress MjN or MkN repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 MTN2 MbN: Select the desired entry.3 M NErasing a number in the redial list1 MTN2 MbN: Select the desired entry. a M N3 MbN: “Yes” a MOKN a M NPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 21).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 0 a MDN (Pause)2 Dial the phone number. a M NNote:R A 3 second pause is inserted each time MDN(Pause) is pressed.Answering callsWhen a call is being received, the ringerindicator and indicator flash rapidly.1 Lift the handset and press M N or MZNwhen the unit rings.2 When you finish talking, press M N orplace the handset on the base unit orcharger.Any key answer: You can answer the call bypressing any dial key.Auto talk: You can answer calls simply bylifting the handset (page 25).Temporary handset ringer off: You can turnthe ringer off temporarily by pressing M N.Using the Smart Function KeyWhen the indicator flashes rapidly, pressM N.R You can answer the call even if the handsetis placed on the base unit or charger(page 14).You can finish talking by pressing M Nwithout lifting up the handset.Adjusting the ringer volumePress MjN or MkN repeatedly to select thedesired volume while ringing.16Making/Answering CallsTGE2xxFX(en-en)_0407_ver011.pdf 16 2014/04/07 11:27:49