n When 2 or more handsets are registered:You should leave one handset on the baseunit for supplying the power, and useanother handset for making calls.Note:R The range of the base unit is limited duringa power failure. Please use the handsetclose to the base unit.Making a call using the redial listn When only 1 handset is registered:1 Lift the handset.2 MEN REDIAL3 MbN: Select the desired phone number.4 Within 1 minute, place the handset onthe base unit.R Wait until speakerphone is turnedon automatically and the call ismade.n When 2 or more handsets are registered:You should leave one handset on the baseunit for supplying the power, and useanother handset for making calls.Making a call using the phonebookThere must be at least 2 handsetsregistered to the base unit in order for thephonebook feature to be used during apower failure.You should leave one handset on the baseunit for supplying the power, and use anotherhandset for making calls.Answering calls during a powerfailuren When only 1 handset is registered:1 When the unit rings, keep the handseton the base unit and press M N orMZN.R Speakerphone is turned on.2 When you finish talking, press MOFFN.n When 2 or more handsets are registered:When the unit rings, use a handset which isnot supplying power to the base unit.R Do not use or lift the handset which isplaced on the base unit during powerbackup mode.Note:R The range of the base unit is limited duringa power failure. Please use the handsetclose to the base unit.26 For assistance, please visit www.panasonic.com/supportMaking/Answering Calls Using the HandsetTGF37x(en)_1128_ver032.pdf 26 2014/11/28 16:08:40