Panasonic KX-TGF380AZ Operating Instructions Manual

Also see for KX-TGF380AZ: Operating instructions

Panasonic KX-TGF380AZ Operating Instructions Manual Manual pdf 18 page image

Important:R When 3 Bluetooth devices (2 mobile phonesand 1 headset) are paired to the base unit, only2 Bluetooth devices can be used with the unit atthe same time, and the base unit loses itsconnection from other Bluetooth devices. Toautomatically resume the connection toBluetooth devices, leave the auto connection on.R Some mobile phones lose connection afterusage, please check the specifications of yourmobile phone for more details.Handset / Base unit1 MMENUN#6322 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R Some mobile phones may ask you if you acceptthe connection requirement from the base unit.In that case, select “Off” in step 2. Check thespecifications of your mobile phone.Connecting/disconnecting the mobile phonemanuallyIf you will not be using the paired mobile phone’slink to mobile feature temporarily (for example, youdo not want the unit to ring when your mobile linereceives a call), you can disconnect your mobilephone from the base unit. If you want to use itagain, reconnect the mobile phone to the base unit.You can configure this setting using either thebase unit or one of the handsets.Note:R After you disconnect a paired mobile phonefrom the base unit manually, it will automaticallybe connected to the base unit in 30 minutes. Ifyou do not use the link to mobile featureanymore, unpair the mobile phone (page 17).R A disconnected mobile phone is not unpairedfrom the base unit, so pairing it to the base unitagain is unnecessary.Handset / Base unit1 To connect/disconnect:For MOBILE 1: MMENUN#6251For MOBILE 2: MMENUN#6252R A long beep sounds.2 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNMobile line only mode (If you do notuse the landline)If you do not use the landline, we recommendsetting the unit to the mobile line only mode.The default setting is “Off”.You can configure this setting using either thebase unit or one of the handsets.Important:R If you turn on the “Mobile line onlymode”, disconnect the telephone line cord fromthe base unit. Otherwise the “Mobile lineonly mode” cannot be activated.Handset / Base unit1 MMENUN#1572 To turn on:MbN: “On” a MSELECTN a MbN: “Yes” aMSELECTNTo turn off:MbN: “Off” a MSELECTNNote:R Once you set this mode, you can use thefollowing buttons to make mobile calls:– for the handset, press M N or MZN instead ofMMOBILEN (page 20).– for the base unit, lift the corded handset orpress MZN without pressing MMOBILE 1N orMMOBILE 2N set for the mobile line selection(page 19, 24).R Once you set this mode, the following featurescannot be used:– Landline features (page 43)– Answering system (page 58)Messages cannot be received.– Voicemail features (page 65)R After this mode is turned on or off, the base unitreboots.– Bluetooth connections from mobile phones orheadset are disconnected. If the autoconnection is turned on (page 17), the mobilephones are reconnected.– will be displayed on the handsetmomentarily. The handset can be used onceis displayed.18Link to Mobile