Panasonic KX-TGF380AZ Operating Instructions Manual

Also see for KX-TGF380AZ: Operating instructions

Panasonic KX-TGF380AZ Operating Instructions Manual Manual pdf 47 page image

Answering the baby monitorHandset / Base unitn When monitoring with a unit:Handset: Press M N to answer a call.Base unit: Press M N to answer a call.If you want to respond from the monitoring unit,press MMUTEN.R The monitoring unit will answer callsautomatically when the auto intercom featureis set to “On” (page 27).Note:R If you receive an outside call whencommunicating with the monitored handset,the interrupt tone sounds.– To answer the call with the handset, pressMOFFN, then press M N.– To answer the call with the base unit, pressM N 3 times.*1*1 If MMUTEN is pressed, press MZN 2 times.n When monitoring from an outside line:Answer the call.If you want to respond from your monitoringphone, press #1 using tone dialling.You can turn off the baby monitor feature bypressing #0.Note:R The unit disconnects the call automaticallyafter 2 minutes.Other programmingChanging the handset nameThe default handset name is “Handset 1” to“Handset 6”. You can customize the name ofeach handset (“Bob”, “Kitchen”, etc.). This is usefulwhen you make intercom calls between handsets.To display the handset name in standby mode,turn on the handset name display feature(page 47).Handset1 MMENUN#1042 Enter the desired name (max. 10 characters).3 MSAVEN a MOFFNDisplaying the handset nameYou can select whether or not the handset nameis displayed in standby mode. The default settingis “Off”.Handset1 MMENUN#1052 MbN: Select the desired setting. a MSAVENa MOFFNChanging the unit’s region setting/Resetting the base unit1 MMENUN#1362 MbN: Select the desired country. a MSELECTN“Australia” = Australia“New Zealand” = New Zealand3 MbN: “Yes” a MSELECTN a MOFFNNote:R Changing the unit’s region setting may causethe settings for your country or your customisedsettings to return to their default settings.Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered to the baseunit.Important:R See page 4 for information on the availablemodel.Registering a handset to the base unitThe supplied handset and base unit arepre-registered. If for some reason the handset isnot registered to the base unit, re-register thehandset.1 Handset:MMENUN#1302 Base unit:Press and hold MLOCATORN for about 5seconds.47Programming