Panasonic KX-TGH222AZ Operating Instructions Manual

Also see for KX-TGH222AZ: Operating instructions Operating instructions

Panasonic KX-TGH222AZ Operating Instructions Manual Manual pdf 33 page image

R The monitoring handset will answer callsautomatically when the auto intercomfeature is set to “On” (page 17).Note:R If you receive an outside call whencommunicating with the monitoredhandset, you hear 2 tones. To answerthe call, press M N, then press M N.n When monitoring from an outside line:To answer a call, follow the operation foryour phone.If you want to respond from the monitoringhandset, press #1 using tone dialling.You can turn off the baby monitor featureby pressing #0.Note:R 2 minutes after the monitored handsetstarts a call, communication between themonitored handset and monitoringphone line is turned off automatically.Other programmingChanging the handset nameThe default handset name is “Handset 1” to“Handset 6”. You can customise the nameof each handset (“Bob”, “Kitchen”, etc.). This isuseful when you make intercom calls betweenhandsets. To display the handset name instandby mode, turn on the handset namedisplay feature (page 33).1 MMENUN (right soft key) #1042 Enter the desired name (10 charactersmax.).3 MOKN a M NDisplaying the handset nameYou can select whether or not the handsetname is displayed in standby mode. Thedefault setting is “Off”.1 MMENUN (right soft key) #1052 MbN: Select the desired setting. a MOKNa M NStoring an area code to bedeleted automaticallyIn some situations, phone numbers storedautomatically in the caller list (page 37) willinclude area codes. If you do not want to dialthe area code when making calls from thecaller list, you can store the area code whichyou want the unit to delete automatically.Example: You have stored the area code“09”. If you make a call from the caller list tothe phone number “09-456-7890”, the unitdials “456-7890”.1 MMENUN (right soft key) #2552 Enter an area code (5 digits max.). aMOKN a M NNote for New Zealand:R The use of this feature can prevent aNational Call from being dialled. E.g., in thecase of the South Island, the “03” will beomitted and will therefore prevent aNational Call to other areas of the SouthIsland.Call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign up to6 phone numbers to be restricted, and selectwhich handsets are to be restricted. Storingarea codes here prevents the restrictedhandsets from dialling any phone number inthat area code.1 MMENUN (right soft key) #2562 Enter the base unit PIN (default: “0000”).R If you forget your PIN, contact anauthorised service centre.3 Select the handsets to be restricted bypressing 1 to 6.R All handsets registered to the base unitare displayed.R “ ” is displayed next to the selectedhandset numbers.R To cancel a selected handset, pressthe same dial key again. “ ”disappears.4 MOKN33ProgrammingTGH222_23AZ(en)_0314_ver101.pdf 33 3/14/2014 10:01:16 AM