Panasonic KX-TGH720E Operating Instructions Manual

recorded. The base unit calls a phone numberyou specify. You can then operate theanswering system remotely to listen to thenew message.To use this feature, you must:– store a phone number to which the unitmakes the call to.– turn on the new message alert setting.After you answer the new message alert call,you can listen to messages from that call(page 45).Important:R A new message alert is stopped 1 minuteafter the unit starts to call. The unit will notretry the call even if the call is not answered.Storing a phone number to which theunit makes an alert calln From the phonebook:1 MMENUN (right soft key) #3382 MbN: “Notification to” a MOKNa MADDN3 MbN: “Phonebook” a MOKN4 MbN: Select the desired phonebookentry. a MOKN5 MbN: Select the desired phone number.a MOKN a M Nn By entering a phone number:1 MMENUN (right soft key) #3382 MbN: “Notification to” a MOKNa MADDN3 MbN: “Manual” a MOKN4 Enter the desired name (16 charactersmax.). a MOKN5 Enter the desired number (24 digitsmax.). a MOKN 2 times a M NTurning on/off the new message alertsetting1 MMENUN (right soft key) #3382 MbN: “On/Off” a MOKN3 MbN: Select the desired setting. a MOKNa M NEditing the set phone number1 MMENUN (right soft key) #3382 MbN: “Notification to” a MOKN3 MMENUN a MbN: “Edit” a MOKN4 Edit the name if necessary (16 charactersmax.). a MOKN5 Edit the phone number if necessary (24digits max.). a MOKN 2 times a M NErasing the set phone number1 MMENUN (right soft key) #3382 MbN: “Notification to” a MOKN3 MMENUN a MbN: “Erase” a MOKN4 MbN: “Yes” a MOKN a M NR The new message alert setting isturned off.Activating/inactivating the remoteaccess code to play messagesIf you activate this feature, you must enter theremote access code (page 46) to play thenew message from the new message alertcall. This is so that unauthorised partiescannot listen to your messages. The defaultsetting is “Inactivate”.– “Inactivate”: You can listen to themessage by pressing 4 to play newmessages (without entering the remoteaccess code).– “Activate”: You must enter your remoteaccess code and then press 4 to play newmessage.1 MMENUN (right soft key) #3382 MbN: “Remote Code” a MOKN3 MbN: Select the desired setting. a MOKNa M NListening to messagesAfter you answer the new message alert, youcan listen to the messages as follows.Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 45Answering System