Making cellular callsImportant:R The unit can be used to talk on 2 lines atthe same time (for example, 2 cellular lines,or the landline and 1 cellular line).R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).R Before making calls, confirm that thecorresponding on the handset isdisplayed (page 13).1 Lift the handset and then dial the phonenumber.R To correct a digit, press MCLEARN.2 MCELLNR The unit starts dialing immediately inthe following situations.– Only 1 cellular phone is paired.– A specific line is set to make cellularcalls (page 19).Go to step 4.3 MbN: Select the desired cellular phone. aMSELECTN4 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Note:R In step 1, you can store the dialed phonenumber to the phonebook by pressing andholding MFN W for a few seconds.R While talking, you can switch between thereceiver and the speakerphone by pressingM /ZN.Adjusting the receiver or speakervolumePress MjN or MkN repeatedly while talking.Note:R The receiver or speaker volume you set iskept for each line (landline and cellularlines).Making landline calls1 Lift the handset and then dial the phonenumber.R To correct a digit, press MCLEARN.2 Press M /ZN to make the call.R To make the call using thespeakerphone, press and hold M /ZN for a few seconds.R While talking, you can switch betweenthe receiver and the speakerphone bypressing M /ZN.3 When finished, press MOFFN or place thehandset on the base unit or charger.Note:R In step 1, you can store the dialed phonenumber to the phonebook by pressingMSAVEN.Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 30).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MDN (Pause)2 Dial the phone number. a M /ZNNote:R A 3.5 second pause is inserted each timeMDN (Pause) is pressed.RedialingMaking a call using the redial listThe redial list displays up to 20 previouslydialed phone numbers (48 digits max. each).1 MEN (Redial/CID)R If there is a missed call, “Missedcall” is displayed. To display the20 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGL46x(en)_1007_ver003.pdf 20 2015/10/07 14:36:37