Main menu: “Key detector”*12Sub-menu 1 Sub-menu 2 Settings CodeSearch – – #655 –Battery check – –*1 If you program these settings using one of the units, you do not need to program the sameitem using another unit.*2 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*3 When the cellular line only mode is turned on, these menus are not displayed (page 18).*4 After the Bluetooth device is paired, the device name is displayed.*5 For CELL 1*6 For CELL 2*7 The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of© 2009 Copyrights Vision Inc.*8 The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of© 2013 Copyrights Vision Inc.*9 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select“Manual”. (Caller ID subscribers only)To use this feature, set the date and time first (page 14).*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or2). If you select a melody, you cannot distinguish lines by their ringers.*11 This tone lets you know when you receive an outside call while you are on another line or anintercom call. If you select “On”, the tone sounds 2 times.*12 This setting is available when you have the key detector (KX-TGA20). Read the installationmanual for more information on the key detector.*13 For models with supplied key detectors, the display shows “1: Detector1”.*14 If you register 2 or more key detectors.*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*16 The flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails topick up the waiting call.*17 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Make sure the unit’s date and time settingis correct (page 14).1 MMENUN#7202 MbN: Select the desired alarm. aMSELECTNFor assistance, please visit http://shop.panasonic.com/support 39ProgrammingTGL46x(en)_1007_ver003.pdf 39 2015/10/07 14:36:39