Panasonic KX-TGM430 Operating Instructions Manual

Also see for KX-TGM430: Quick guide Operating instructions Operating instructions Operating instructions

Contents

Panasonic KX-TGM430 Operating Instructions Manual Manual pdf 39 page image

Making landline calls1 Lift the handset and then dial the phonenumber.R To correct a digit, press MCLEARN.2 Press MTALKN to make the call.R To make the call using thespeakerphone, press MZN.3 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Note:R While talking, you can switch between thereceiver and the speakerphone by pressingMZN.R In step 1, you can store the dialed phonenumber to the phonebook by pressing andholding MFN W for a few seconds.Making a call using the redial listThe last 5 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired entry.3 MTALKNPause (for PBX/longdistance service users)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 49).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MDN (Pause)2 Dial the phone number. a MTALKNNote:R A 3.5 second pause is inserted each timeyou press MDN (Pause) on the handset.Answering callsUsing the handsetWhen a call is being received, the messageindicator flashes rapidly if the handsetmessage indicator’s “Incoming call”setting is enabled (page 31).1 Lift the handset and then press MTALKNor MZN when the unit rings.R To answer a cellular call, you can alsopress MCELLN.2 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Any key answer: You can answer the call bypressing any dial key (1 to 9, *, or #).Auto talk: You can answer calls simply bylifting the handset (page 58).Temporary handset ringer off: You can turnthe ringer off temporarily by pressing M N (leftsoft key).Using the base unitWhen a landline call is being received, theSP-PHONE indicator (Z) flashes rapidly.When a cellular call is being received, theCELL indicator and SP-PHONE indicator (Z)flash rapidly.Additionally, the message indicator flashesrapidly if the base unit message indicator’s“Incoming call” setting is enabled(page 31).1 Press MZN when the unit rings.R You can also answer the cellular callby pressing MCELL 1N or MCELL 2N.2 Speak into the microphone.3 When you finish talking, press MZN.Note:R While on a call, you can switch from thebase unit to the handset:– Press MTALKN on the handset, thenpress MZN on the base unit with the callsharing mode on (page 59).– If the handset is on the base unit, simplylift it.For assistance, please visit http://shop.panasonic.com/support 39Making/Answering CallsTGM43x(en)_0426_ver031.pdf 39 2016/04/26 10:55:18