Problem Cause/solutionThe unit does not emit thespecified number of rings.R If the first ring is turned off (“No”) (page 46), the numberof rings decreases by 1 from the specified number ofrings.Bluetooth PINProblem Cause/solutionI cannot remember the PIN. R Change the PIN using the following method.1 MMENUN#6192 *70003 Enter the new 4-digit PIN. a MOKN4 Enter the new 4-digit PIN again. a MSAVEN a MOFFNVoicemailProblem Cause/solution“Voicemail msg. viaphone co.” is shown on thehandset display.How do I remove this messagefrom the display?R This notification is displayed when your phone serviceprovider’s voicemail service (not the unit’s answeringsystem) has recorded a message for you. Typically youcan remove this notification from the display by listeningto the message. To listen to the message, dial thevoicemail number provided by your phone serviceprovider (for most cases, this will be your own phonenumber), and follow the voice instructions. Depending onyour phone service provider, you may need to remove allmessages from your voice mailbox to remove thenotification. You can also remove this notification bypressing and holding # until the unit beeps.Liquid damageProblem Cause/solutionLiquid or other form of moisturehas entered the handset/baseunit.R Disconnect the AC adaptor and telephone line cord fromthe base unit. Remove the batteries from the base unitand handset and leave to dry for at least 3 days. After thehandset/base unit are completely dry, reconnect the ACadaptor and telephone line cord. Insert the batteries andcharge fully before use. If the unit does not work properly,contact an authorized service center.Caution:R To avoid permanent damage, do not use a microwave oven to speed up the drying process.90 For assistance, please visit http://shop.panasonic.com/supportUseful InformationTGM43x(en)_0426_ver031.pdf 90 2016/04/26 10:55:20