Y Programming using the Handset31Document Version 2010-08Do Not DisturbThis feature allows the unit to reject calls onselected lines.The default setting is “Off”.Important:L We recommend setting with your administrator.Contact your administrator for furtherinformation.L If this feature is set on your unit, it may beoverridden by your phone system settings.L This feature is not available on shared lines.L The call is logged in the caller list (page 43) withQ after the call is rejected.1 {MENU} (centre of joystick)2 {V}/{^}: “IP Service” i {SELECT}3 {V}/{^}: “Call Features” i {SELECT}4 {V}/{^}: “Do Not Disturb” i {SELECT}5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i{SELECT}6 {V}/{^}: Select “On” or “Off”. i {SAVE}i {OFF}Block anonymous callsThis feature allows the unit to reject calls when theunit receives a call without phone number.The default setting is “Off”.Important:L We recommend setting with your administrator.Contact your administrator for furtherinformation.L This feature is not available on shared lines.L The call is logged in the caller list (page 43) withQ after the call is rejected.1 {MENU} (centre of joystick)2 {V}/{^}: “IP Service” i {SELECT}3 {V}/{^}: “Call Features” i {SELECT}4 {V}/{^}: “Block Anonymous” i{SELECT}5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i{SELECT}6 {V}/{^}: Select “On” or “Off”. i {SAVE}i {OFF}Incoming call barring (CallerID service users only)This feature allows the unit to reject calls fromspecified phone numbers that you do not want toanswer such as junk calls.When a call is received, the unit does not ring whilethe caller is being identified. If the phone numbermatches an entry in the call barred list, the unitrejects the call.Important:L When the unit receives a call from a number thatis stored in the call barred list, the call is loggedin the caller list (page 43) with 7 after the call isrejected.Storing unwanted callersYou can store up to 30 phone numbers in the callbarred list by using the caller list or by entering thenumbers directly.Important:L It is advised to store the phone number with anarea code for PSTN calls in the call barred list.From the caller list:1 {CID} (left soft key)2 {V}/{^}: Select the entry to be barred. i{MENU}3 {V}/{^}: “Add Bar List” i {SELECT}4 {V}/{^}: “Yes” i {SELECT} i {OFF}By entering phone numbers:1 {MENU} (centre of joystick) i{#}{2}{1}{7} i {ADD}2 Enter the phone number (24 digits max.). i{SAVE}L To erase a digit, press {CLEAR}.3 {OFF}VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299