Panasonic KX-TGP550 T04 User Manual

Also see for KX-TGP500: Quick guide Quick guide Administrator's guide User guide Quick user guide

Contents

Panasonic KX-TGP550 T04 User Manual Manual pdf 29 page image

Y Programming using the Handset29Document Version 2012-01Call forwardIncoming calls can be forwarded to another party.You can choose one of 3 modes:– “Unconditional”: All incoming calls areforwarded.– “Busy”: Incoming calls while the line is in useare forwarded.– “No answer”: Incoming calls after a certainnumber of rings are forwarded. The defaultsetting of the number of ring count is “3”. Tochange the setting, perform “Changing the ringcount”, page 29.Important:L We recommend setting this feature with youradministrator. Contact your administrator forfurther information.L If this feature is set on your unit, it may beoverridden by your phone system settings.L This feature is not available on shared lines.L The call is logged in the caller list (page 42) withQ after the call is forwarded.Turning call forward on/off1 {MENU} (center of joystick)2 {V}/{^}: “IP service” i {SELECT}3 {V}/{^}: “Call features” i {SELECT}4 {V}/{^}: “Call forward” i {SELECT}5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i{SELECT}6 {V}/{^}: Select the desired option. i{SELECT}7 {V}/{^}: “On/Off” i {SELECT}8 {V}/{^}: Select “On” or “Off”. i {SAVE}L If you select “Off”, press {OFF} to exit.L If the phone number forwarded to has beenalready set, press {OFF} to exit. To changethe phone number, repeat from step 7,“Changing the phone number”, page 29,then press {OFF} to exit.9 Enter the phone number you want to forwardcalls to (24 digits max.). i {SAVE}L If you have selected “No answer”, enterthe number of rings before the unit forwardscalls (0, 2-20 rings). i {SAVE}10 {OFF}Changing the phone number1 {MENU} (center of joystick)2 {V}/{^}: “IP service” i {SELECT}3 {V}/{^}: “Call features” i {SELECT}4 {V}/{^}: “Call forward” i {SELECT}5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i{SELECT}6 {V}/{^}: Select the desired option. i{SELECT}7 {V}/{^}: “Phone number” i {SELECT}8 Enter the phone number you want to forwardcalls to (24 digits max.). i {SAVE} i{OFF}Changing the ring countYou can change the number of rings before whichthe call is forwarded if “No answer” is selected.1 {MENU} (center of joystick)2 {V}/{^}: “IP service” i {SELECT}3 {V}/{^}: “Call features” i {SELECT}4 {V}/{^}: “Call forward” i {SELECT}5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i{SELECT}6 {V}/{^}: “No answer” i {SELECT}7 {V}/{^}: “Ring count” i {SELECT}8 Enter the number of rings before the unitforwards calls (0, 2-20 rings). i {SAVE} i{OFF}