NoteR For details about the other operations, see “Screen Transition Diagram”, Page 48.Making a call using the Incoming/Outgoing Call LogSee “Using the Incoming/Outgoing Call Log”, Page 59.Storing an item using the Incoming/Outgoing Call LogSee “Storing an Item Using the Incoming or Outgoing Call Log”, Page 75.Deleting the Incoming Call Log[When the Incoming Call Log is displayed]1. [D]/[C]: Select the desired item. a /MENU /Menu2. [D]/[C]: "Delete"*1 aOK3. [D]/[C]: "Yes" aOKTo delete other items, go back to Step 1.*1 You can select "Delete All" instead to delete all items.Deleting the Outgoing Call Log[When the Outgoing Call Log is displayed]1. [D]/[C]: Select the desired item. a /MENU /Menu2. [D]/[C]: "Delete"*1 aOK3. [D]/[C]: "Yes" aOKTo delete other items, go back to Step 1.*1 You can select "Delete All" instead to delete all items.Parallel Mode (KX-TPA65/KX-TPA68)By using a desk phone as a master desk phone (KX-TPA65/KX-TPA68), a handset (KX-TPA60) can beset to be paired with it so that the phone number (account) of the master desk phone is applied to theslave (paired) handset. With pairing settings, the desk phone can be used while you are sitting at yourdesk, and the slave handset can be used while away from your desk.KX-TPA65/KX-TPA68:1. /MENU /Menu2. KX-TPA60/KX-TPA65:[D]/[C]/[F]/[E]: aOKKX-TPA68:[D]/[C]: "System Settings"aOK3. [D]/[C]: "System Settings" *1aOK4. [D]/[C]: "Parallel Setting"aOK5. [D]/[C]: Select the desk phone (KX-TPA65/KX-TPA68) to use as the master unit. aOK6. [D]/[C]: "Pairing" aOK7. [D]/[C]: Select the handset (KX-TPA60) to use as the paired unit.R To cancel pairing: "Off" aOK8. [D]/[C]: "Mode" aOK52Before Operating the Telephones