Panasonic KX-TH112 Operating Instructions Manual

Also see for KX-TH112 - Cordless Phone - Operation: Quick guide

Contents

Panasonic KX-TH112 Operating Instructions Manual Manual pdf 33 page image

G Caller ID ServiceFor assistance, please visit http://www.panasonic.com/phonehelp 33Note:L If the indicated line is already being usedor you want to select the other line,select the desired line by pressing{LINE1} or {LINE2}.Displayed symbolsL m and n indicate which line the callerinformation was received from.L If the same caller calls more than once, itis displayed with the number of times thecaller called (“×2” to “×9”). Only the dateand time of the most recent call isstored.L A Q is displayed next to items whichhave already been viewed or answered.Editing a caller’s phone numberbefore calling back Y ^You can edit a phone number in the callerlist by removing its area code and/or thelong distance code “1”.1 {MENU} (center of joystick) i Gi {SELECT}2 Select the desired item.3 Press {EDIT} repeatedly until thephone number is shown in the desiredformat.1 Local phone number2 Area code – Local phone number3 1 – Area code – Local phonenumber4 {C}1 {MENU} i G i {SET}2 Select the desired item.3 Press {EDIT} repeatedly until thephone number is shown in the desiredformat.1 Local phone number2 Area code – Local phone number3 1 – Area code – Local phonenumber4 {SP-PHONE}Caller ID number auto edit featureOnce you call back an edited number, theunit will remember the Area Code andFormat of the Edited Number. Next timewhen someone calls from the same AreaCode, caller information will be customizedby the unit as follows:– When the call is being received, theCaller ID number will be displayed in thesame Format as the Edited Number.– After the call is ended, the telephonenumber of the caller, when reviewedfrom the Caller list, will be displayed inthe same Format as the Edited Number.For example, you can use this feature toset the unit to ignore the area code ofcallers in your area code, so that you cancall these local numbers using callerinformation without dialing the area code.To activate this feature, you must edit anitem in the caller list, then call that number.After that, phone numbers from thatcaller’s area code are edited automatically.This feature can be turned on or off (page45). The default setting is “On”.HandsetExample:Example:Example:321-5555555-321-55551-555-321-5555Base unitExample:Example:Example:321-5555555-321-55551-555-321-5555