Programmable SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 41Ringer settingsRinger volume Y ^1 {MENU} (center of joystick) i fi {SELECT}2 “Ringer volume” i {SELECT}3 Select the desired line.4 Select the desired volume. (Default:High)L To turn the ringer off, push {V}repeatedly until “Off ?” is displayed.5 {SAVE} i {OFF}1 {MENU} i f i {SET}2 “Ringer volume” i {SET}3 Select the desired line.4 Select the desired volume. (Default:High)L To turn the ringer off, press {V}repeatedly until “Off ?” is displayed.5 {SET} i {STOP}Note for handset and base unit:L When the ringer volume is set to off for aline, “Ringer off” is displayed and thehandset or base unit does not ring foroutside calls received on that line.Ringer tone Y ^You can change the ringer tone heardwhen an outside call is received.Important:L You can record songs for the handsetringer tone from an audio device (page42).1 {MENU} (center of joystick) i fi {SELECT}2 “Ringer tone” i {SELECT}3 Select the desired line.4 Select the desired item. (Default: Line1: “Tone 1”, Line 2: “Tone 2”) i{SAVE} i {OFF}Note:L If you subscribe to a distinctive ringservice (such as IDENTA-RING), selecta tone (tone 1 to 3) for the handset ringertone. If you select a melody or a song,you cannot distinguish lines by theirringers.L If you select a melody or a song for thehandset ringer tone, the ringer continuesto sound for several seconds if:– the caller hangs up before you answerthe call.– another person answers the call usinganother phone connected on thesame line.L The preset song “Melody 1” in thisproduct is used with the permission of ©2005 Speed Crazy.L The preset songs “Tone 4”, “Tone 5”,and “Melody 2” in this product are usedwith the permission of © 2006Copyrights Vision Inc.1 {MENU} i f i {SET}2 “Ringer tone” i {SET}HandsetBase unitHandsetBase unit