Programming29For assistance, please visit http://www.panasonic.com/help*1 If “System setting” column is checked, you do not need to program the same itemusing another handset.*2 If you subscribe to Caller ID service and want to view the caller’s information afterlifting up the handset to answer a call, turn off this feature.*3 Turn this feature off if you prefer not to hear key tones while you are dialing orpressing any keys, including confirmation tones and error tones.For cellular lines*1 If “System setting” column is checked, you do not need to program the same itemusing another handset.*2 If you select one of the melody ringer tones, the ringer tone will continue to play forseveral seconds even if the caller has already hung up. You may either hear a dialtone or no one on the line when you answer the call.*3 When the ringer volume is set to off for a cellular line, “Ringer off” is notdisplayed in standby mode.Feature FeaturecodeSetting code Systemsetting *1PageArea code(cell) {6}{3}{3} – r 18Auto connection {6}{3}{2} {1}: <1min>{2}: 3min{3}: 5min{4}: 10min{0}: Offr 18Cellular linemode{1}{5}{7} – r 33Change PIN {1}{3}{2} – r 18Deregistration {*}{1}{3}{4} – – 19Discoverable {6}{2}{0} {1}: On{0}: <Off>r 19Ringer tone*2(Cellular line 1){6}{2}{9}i {1} {1}–{3}:Tone 1–<3>{4}–{7}:Melody 1–4––Ringer tone*2(Cellular line 2){6}{2}{9}i {2} –Ringer volume*3(Cellular line 1){6}{2}{8}i {1} {1}: Low{2}: Medium{3}: {0}: Off––Ringer volume*3(Cellular line 2){6}{2}{8}i {2} –Select HS(ring)(Cellular line 1){6}{2}{7}i {1}– r 19Select HS(ring)(Cellular line 2){6}{2}{7}i {2}