Monitoring using a Handset16 For assistance, please visit http://www.panasonic.com/phonehelpVideo monitor using ahandsetThis feature allows the handset to monitorthe image and sound of the room wherethe cordless camera is located. Themonitored camera does not ring, allowingyou to easily monitor a baby’s room, forexample, from different areas of thehouse.You can monitor the room when:– you access the cordless camera usingthe handset (“Monitoring the roomY p j”, page 16).– the cordless camera pages the handsetwhen it detects motion and/or sound(“Cordless camera sensor Y p j”,page 17).– the cordless camera user pages thehandset using the call button (“Cordlesscamera call button Y p j”, page 19).Important:L For information of the cordless cameralocation, see page 9.L Before you start monitoring, confirm thatthe camera lens of the cordless camerahas been adjusted to the correct angle.L Only 1 person can access the cordlesscamera at a time.L The model No. for the compatiblePanasonic units are the followings:– KX-THA12: cordless video camerahandset– KX-THA16: cordless video camerastation– KX-THA17: cordless video camerahandset with A/V outputMonitoring the room Y p jKX-THA12/KX-THA17:1 {MENU} (F2) i H i {SELECT}2 “Camera & Audio” i {SELECT}3 Select the desired unit. i {SELECT}L To start/finish talking with the otherparty, press {2WAY}.4 Press {OFF} to stop monitoring.KX-THA16:1 {MONITOR} (F5)2 “Camera & Audio” i {SELECT}3 Select the desired unit. i {SELECT}L To start/finish talking with the otherparty, press {2WAY}.4 Press {OFF} to stop monitoring.Note:L Once the handset user presses {2WAY}in step 3, the cordless camera user cantalk with the handset user. Speak clearlyinto the MIC on the cordless camera.L You can page the handset by pressing{Call button} while the handset ismonitoring the cordless cameraregardless of the cordless cameradetection mode setting.L When {Call button} is pressed whilemonitoring with the handset, {2WAY}flashes on the display to notify you thatthe cordless camera is paging you.Press {2WAY} to answer the page.Adjusting receiver/speaker volumePress {^} or {V} while monitoring.