Useful Information42 For assistance, please visit http://www.panasonic.com/phonehelpTroubleshootingProblem Cause & solutionThe cordless cameradoes not work.L Check the connections (page 12).The cordless camera’sindicator is flashingrapidly in red.L The cordless camera is not registered to the base unit.Register the cordless camera to the base unit (page15).The cordless camera’sindicator lights in orange.L The link between the cordless camera and yourcomputer could not be established. The resourcesavailable for wireless communication are limited. Waitfor other users to finish and try again.L If you do not intend to view the images using yourcomputer, set the “PC camera access” to “Off” (page21) with the base unit.The cordless camera’sindicator is flashingrapidly in orange.L The IP address which has been assigned for thecordless camera is invalid. Check the connections(page 22).I cannot read thelanguage displayed bythe MULTI TALK VCamera Utilityapplication.L You can change the application’s display language toEnglish, French, or Spanish. Right-click the MULTITALK V Camera Utility icon in the task tray, then clickthe desired language.The image is faint. L The camera lens is dirty. Clean it with a soft dry cloth.The image sent from thecordless camera is poor.L Adjust the display sharpness or brightness setting(page 30, 31).L The place where the cordless camera is located is dark.Improve lighting.The image sent from thecordless camera is darkand difficult to see.L Adjust the display brightness setting (page 31).L There is a strong sunlight or a backlight in the placewhere the cordless camera is located. Try shading thecamera’s location.I cannot connect to thecordless camera, theimage distorts, or theimage is slow.L The cordless camera has lost communications with thebase unit. Move the cordless camera closer to the baseunit, and try again.L There is an obstacle such as concrete wall. Move thecordless camera to the place without an obstacle.L A microwave or wireless LAN appliance is in use. Movethe cordless camera closer to the base unit or use thecordless camera away from those appliances, and tryagain.