Panasonic KX-TS4200 Operating Instructions Manual

Contents

Panasonic KX-TS4200 Operating Instructions Manual Manual pdf 27 page image

Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 273 Select “Ringer On/Off”, thenpress {MENU/SET}.4 Select the line you want to set, thenpress {MENU/SET}.5 Select the desired setting, then press{MENU/SET}.6 Press and hold {MENU/SET} toreturn to standby mode.Note:L To return to the previous menu, press{<}.Ringer typeSelect a ring pattern (4 types) for eachline.Important:L Make sure that the unit is in standbymode.1 Press {MENU/SET}.2 Select “Advanced Setup”, thenpress {MENU/SET}.3 Select “Ringer Type”, then press{MENU/SET}.4 Select the line you want to set, thenpress {MENU/SET}.5 Select the desired setting, then press{MENU/SET}.6 Press and hold {MENU/SET} toreturn to standby mode.Note:L To return to the previous menu, press{<}.L Incoming intercom calls use Type-1and cannot be changed.Turning Do Not Disturb(DND) on/offYou will not hear call rings or pagingwhen this feature is activated. The lineindicator flashes for outside calls and theINTERCOM indicator flashes forintercom calls.Press {DND} to turn on/off the Do NotDisturb (DND) feature.L When the Do Not Disturb (DND)feature is turned on, the DND indicatorlights and the display shows “DND”.L When the Do Not Disturb (DND)feature is turned off, the DND indicatorgoes out.➔Ringer On/OffRinger TypeLine Group[V/^]:Scroll➔Line1 RingerLine2 RingerLine3 Ringer[V/^]:ScrollLine1 Ringer=On[SET]:Save[V/^]:Change➔Ringer TypeLine GroupDisplay MSGW[V/^]:Scroll➔Line1 Ring TypeLine2 Ring TypeLine3 Ring Type[V/^]:ScrollLine1 Ring Type=Type-1[SET]:Save[V/^]:Change03:45P 02/23 MONDND 11CID:100/198 MSGW1 34