Preparation11Setting up the unitbefore useDisplay languageYou can select “English” (English),“Españ ol” (Spanish), “Italiano”(Italian), “Português” (Portuguese),“ΕΛΛΗΝΙΚ Α” (Greek) and“Nederlands” (Dutch) as the displaylanguage.The default setting is “English”(English).1 {l/ } > {4} / {3}: “Changelanguage?” > {OK}2 {4} / {3}: Select the desiredsetting > {OK} > {l/ }Date and time1 {l/ } > {4} / {3}:“Set clock ?” > {OK}2 Enter the current year byselecting 2 digits.Example: 2010{1} {0}≥ You can select the year from 2000to 2099.3 {OK}4 Enter the current hour and minuteby selecting 2 digits for each.Example: 9:30{0} {9} {3} {0}5 {OK}≥ If numbers between 0000 and 0059,or 1300 and 2359 are entered, thetime will automatically set using the24-hour clock. Skip steps 6 and 7,and go to step 8.6 Press {#} to select “AM”, “PM” or24-hour clock.≥ Each time you press {#}, theselection will change on the display.7 {OK}8 Enter the current day and monthby selecting 2 digits for each.Example: 15 July{1} {5} {0} {7}9 {OK} > {l/ }≥ If the date and time are enteredwrong, “ERROR” will be displayed andyou cannot continue with the setting.Enter the correct date and time.For Caller ID service users(page 24)If a time display service is availablewith the Caller ID service:≥ The Caller ID information will re-set theclock after the ring if:s the adjusted time and/or date isincorrect.s the time adjustment set to ON.Display OptionAMPM(Blank display)AMPM24-hourclockKX-TS880EX.book Page 11 Tuesday, November 23, 2010 3:41 PM