15Basic Operation• Caller information will not be displayed in the following cases:— If the caller dialed from an area which does not provide a Caller ID service, thedisplay will show “OUT OF AREA”.— If the caller has requested not to display his/her information, the display willshow “PRIVATE CALLER”.— If a long distance call is identified and caller’s name and/or number cannot bereceived, the display will show “LONG DISTANCE”.• If your unit is connected to a PBX which does not support Caller ID services, youcannot access those services.Using the Caller ListIf you have received 10 new calls, thenumber of new calls will be displayed asshown, while the unit is not in use.Viewing the Caller ListTo check who has called, follow the steps below.1 Press [ ] or [ ] to enter the CallerList.2 To search from the most recent call,press [ ].• To search from the oldest call, press [ ].• To scroll between callers, press [ ] or[ ].3 To exit the Caller List, press .• If “NO ITEMS STORED” is displayed, the Caller List is empty.• If more than one call is received from the same caller, the date and time of themost recent call will be recorded.• If the batteries installed in the unit have expired, Caller ID services will not beavailable.• If the name and the time/date display service is available in your area, thedisplay will show caller’s names and the time/date the calls were received. Forfurther information, please contact your telephone company.10 MISSED CALLS12:34 24/11111444777711:50 24/11 NEW