Panasonic KX-TSC11HGW Operating Instructions Manual

21Advanced Operation6 Press .• To continue storing other items, repeatfrom step 2.• The display will return to step 1. To exitthe programming mode, press or waitfor 60 seconds.• If the display shows “PHONEBOOK FULL” in step 2, press to exit. To erase otherstored items from the Phone Book List, see page 26.• You can exit the programming mode any time by pressing .• If a pause is required for dialing, press where needed. If required, you canalso store in a phone number. Pressing or counts as one digit(p. 27, 28).• To store numbers for calling card access (see “Chain Dial” on page 24), werecommend you add pauses after each item. Storing pauses with numbers willprevent misdialing (p. 27). The delay time necessary will depend on yourtelephone company.• When using the Dial Lock (p. 30) or Call Restriction feature (p. 31), you cannotstore the emergency number in the Phone Book.• If the display shows “DIAL LOCKED” or “CALL RESTRICTED” in step 4, you cannotstore the emergency number in the Phone Book. See page 30, 31.• When the dialing buttons are locked (p. 30), only numbers stored in the PhoneBook as emergency numbers can be dialed.• When storing a name, you can also enter space by pressing [0] twice. Items withspace at the beginning will be displayed with first priority.See page 23.To store an emergency number:When storing a name in step 3 on page 20, enter # at the beginning of thename by pressing [#]. See page 22.• Items with # at the beginning will be displayed with first priority if DIAL LOCK orCALL RESTRICTION is set to ON. See page 30, 31.SAVEDOKR R