Receiving MessagesSubscriber'sMain Command Menu1 2 3 4 5 6 *Repeat Next Erase Reply Transfer HelpReceiveMessage1 2 3 4 7 0Go toStep 4Replying to MessagesThis feature is available onlywhen the message has beendelivered from a Subscriberusing his mailbox i.e. MessageTransfer and Message Delivery.Otherwise, you will hear thisprompt: “Sorry, you cannot re-ply. The message sender is un-known.”1-2 Same as Receiving Messages.3 Press 4 to reply to the message.4 Press 2 to record a message.5 Record your message at the tone.6 Press 1 to end recording.7 Press 2 to accept.8 Press 1 to set delivery time.9 Press 1 to specify the delivery time or theprivate status.10 Press 1 to specify the delivery time.11 Enter the time and # .12 Press 1 for AM or 2 for PM.13 Enter the date (the day of the month) and# .14 Press 2 to accept.15 Press 1 to set this message to a privatemessage. Otherwise, press 2 .TipStep 4 —You can call the message sender by pressing [1].Step 6 —You can pause/restart recording by pressing [2].Step 9 —You can make your reply immediate by pressing [2].You will skip to step 15.Step 11 —If you press [0] for help here, “For example, to enter 5o’clock press [5] and [#] or 5 : 15 press [5], [1], [5] and