Mailbox SetupSetting Notification by CallingSubscriber'sMain Command Menu1 3 4 5 *OtherFeatures1 MessageWaitingNotificationSettingInterviewM.B.ManagementExternalMessageDelivery2 3ChangeDeviceStatusChangeM.W.LampStatusAssignTel. No.2 6321ContinuouslySchedule Do not useDevice No.321The VPS calls the preset telephone or beeper when anew message is recorded in your mailbox. Set the fol-lowing three parameters as appropriate.The VPS can notify your beeper with the callbacknumber of the party who left the message. For thisfeature to work, the telephone number stored on theVPS for your beeper must include the beeper displaycommand.Setting Device StatusFor each device, the notification is enabled, disabledor enabled on the preset schedule.If you want to enable it on the schedule, contact yourSystem Administrator as you are not allowed to setthe schedule by yourself.1-3 Same as the Message Waiting Lamp Status.4 Press 2 to set the device status.5 Enter the device number.6 Press 1 – 3 to select the status.TipStep 6 —1 Schedule (enabled on the schedule)
