Panasonic KX-UT113 Operating Instructions Manual

Also see for KX-UT113: Configuration guides User guide Administrator's guide Administration guide Operating instructions

Contents

Panasonic KX-UT113 Operating Instructions Manual Manual pdf 40 page image

Settings DetailsRingerSetting Description Value Range DefaultRinger Volume Adjust the ringer volume. Level 0 to 6 Level 3Ringtone Select a ringtone to play when youreceive a call. If multiple lines areconfigured on your unit, you must firstselect which line to use the ringtonefor. You can assign a differentringtone to each line.If you select"Automatic" (KX-UT133/KX-UT136 only), the ringtoneassigned through Web user interfaceprogramming (Page 56) will beused.Each ringtone will play as youhighlight it.Automatic(KX-UT133/KX-UT136 only),Ringtone 1–Ringtone 32Automatic(KX-UT133/KX-UT136)Ringtone 1(KX-UT113/KX-UT123)Note• The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.• Ringtone 20 to Ringtone 24 are the same as Ringtone 1.• Even if you have turned the volume off (level 0), each ringtone will still play when you highlight it.However, nothing plays when you highlight "Automatic".• Ringtones can also be assigned to individual entries in the phonebook list (Page 35).• For KX-UT133/KX-UT136, ringtones may also be assigned to individual DN buttons (flexible buttons,Page 34) through Web user interface programming (Page 56). However, ringtones specified hereoverride the DN button settings. For details, consult your administrator or dealer.ECO ModeSetting Description Value Range DefaultECO Mode Enabling this mode reduces theamount of electricity consumed bythe unit.On, Off OffNote• When ECO mode is enabled, the Speed/Duplex setting (Page 45) changes as follows:– Speed/Duplex: "10M-Full"– PC port cannot be used.• When the ECO mode setting is changed, the unit will restart.• When ECO mode is enabled,ECO is displayed while the unit is in stand-by mode.40 Operating Instructions Document Version 2011-09Customizing the Telephone